M.A. Supplies Group

Quality Products for the Flexo, Printing and Converting Industries

Material Handling and Converting Equipment

BACK

ROLL RUNNER II

MH-80A &C Roll Handling & Unstacking Carts

Max. Roll Wt. with TILT PLATFORM: 300 lbs. - Model 80A
Max. Roll Wt. with Core-Lift Boom & Swivel Cradle: 800 lbs. - Model 80A
Max. Roll Wt. with Core-Lift Boom & Swivel Cradle: 500 lbs. - Model 80C
Winch Type: Manual with Automatic Brake

The trolley on the Roll Runner II may be equipped with one of the three (interchangeable) attachments described below:

(1)  TILT PLATFORM. The Platform is equipped with a belt which can be placed around a roll and then cranked in, pulling the roll securely onto the platform. The Platform may then be lowered or raised. Finally, the Platform may be tilted at a 90 degree angle, bringing the roll to an upright position. Tilt-Platform is available in both 300# and 400# models.

(2)  CORE-LIFT BOOM. The Core-Lift Boom is equipped with a series of rollers which allow the roll to move easily onto and off of the boom. The boom is designed to fit inside a 3-inch core.

(3)  SWIVEL CRADLE ATTACHMENT. The Swivel Cradle supports and carries the roll from the bottom. The "V" shaped design of the cradle prevents the roll from rolling out. The cradle may be rotated 360 degrees to help in positioning the roll for installation or removal.

Available Roll Runner II Products:

MH-80A Main Frame (no attachments)
MH-80C Main Frame (no attachments)
*Electric hoist model

Attachments:
Tilt Platform, 300#
Tilt Platform, 400#
Swivel Cradle
Core-Lift

BACK